Headings:

  • General Publications
  • Books written by Prof. Avitzur
  • Books edited by Prof. Avitzur
  • Patents held by Prof. Avizur and/or Metalforming Inc.

    • General Publications

    1. Avitzur, B. and Yang, C.T., "Analysis of Power Spinning of Cones," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 82, No. 3, Aug. 1960.
    2. Avitzur, B., "Maximum Reduction in Cold Strip Rolling," Proc. of the Inst. of Mech. Engs., England, Vol. 174, No. 32, 1960, pp. 866-884.
    3. Avitzur, B., "Power Analysis of Cold Strip Rolling," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 85, Feb. 1963, pp. 77-88.
    4. Avitzur, B., "Analysis of Wire Drawing and Extrusion Through Dies of Small Cone Angle," J. of Eng. for Ind., Trans. ASME,Series B, Vol. 85, Feb. 1963, pp. 89-96.
    5. Avitzur, B., "Pass Reduction Schedule for Optimum Production of Tandem Strip Mill," Iron and Steel Engineer, Dec. 1962, pp. 104-114.
    6. Avitzur, B., "An Upper Bound Approach to Cold Strip Rolling," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 86, Feb. 1964, pp. 31-48.
    7. Avitzur, B., "Analysis of Wire Drawing and Extrusion Through Dies of Large Cone Angle," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 86, Nov. 1964, pp. 305-316.
    8. Avitzur, B., "Analysis of Metal Extrusion," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 87, No. 1, Feb. 1965, pp. 57-70.
    9. Avitzur, B., "Tube Sinking and Expanding," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 87, No. 1, Feb. 1965, pp. 71-79.
    10. Avitzur, B., "Analysis of Plastic Working Metals," lecture notebook, Technion Publication, 1964 (in Hebrew).
    11. Avitzur, B., "Forging of Hollow Discs," Israel J. of Technology, Vol. 2, No. 3, 1964, pp. 295-304.
    12. Avitzur, B., "Hydrostatic Extrusion," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 87, No. 1965, pp. 487-494.
    13. Avitzur, B. and Sortais, H.C., "Experimental Study of Hydrostatic Extrusion," J. of Basic Eng., Trans. ASME, Series D. Vol. 88, No. 3, Sept. 1966, pp. 658-668.
    14. Avitzur, B., "Flow Characteristics Through Conical Converging Dies," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 88, Nov. 1966, pp. 410-420.
    15. Avitzur, B., Fueyo, J., and Thompson, J.R., "Analysis of Plastic Flow Through Inclined Planes in Plane Strain," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 89, No. 2, May 1967, pp. 361-375.
    16. Avitzur, B., "Strain Hardening and Strain Rate Effects in Plastic Flow Through Conical Converging Dies," J. of Eng. for Ind.,Trans. ASME, Series B, Vol.89, No.3, Aug. 1967, pp. 556-562.
    17. Avitzur, B., "Analysis of Strengthening of Composite Fibrous Material," presented at the American Institute of Aeronautics and Astronautics Fifth Aerospace Science Meeting in New York, Jan. 23-26, 1967. AIAA 67-172.
    18. Evans, W. and Avitzur, B., "Measurement of Friction in Drawing Extrusion and Rolling," J. of Lub. Tech., Trans. ASME, Series F, Vol. 90, No. 1, Jan. 1968, pp. 72-80.
    19. Avitzur, B., "Analysis of Center Bursting Defects in Drawing and Extrusion," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 90, No. 1, Feb. 1968, pp. 79-91.
    20. Avitzur, B., Metal Forming: Processes and Analysis (Book), Original Edition, McGraw-Hill, 1968, 500 pp. Reprint with revisions and corrections, Robert E. Krieger Publishing Co., Inc., NY, 1979, 498 pages.
    21. Evans, W. and Avitzur, B., "Die Design for Drawing and Extrusion," ASTME Paper MF67-582, presented on May 9-10, 1967, Material Forming Seminar, Buffalo, NY.
    22. Evans, W. and Avitzur, B., "Towards Better Extrusion Die Design," tool and Manufacturing Engineer, No. 1967,pp. 44-46.
    23. Feilbach, W.H., Jr. and Avitzur, B., "Analysis of Rod Shaving and Orthogonal Cutting," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 90, No. 2, May 1968, pp. 393-403.
    24. Evans, W.M. and Avitzur, B., "An Experimental Study of Distortion and Flow Patterns in Hydrostatic Extrusion," Trans. of the Seminar on Materials Technology, Inter. Am. Conf., (sponsored and published by the ASME 1968), pp. 281-290.
    25. Zimerman, Z. and Avitzur, B., "Central Bursting in Rods Prevented by Die Design," Metal Progress, Feb. 1969, pp. 103-104.
    26. Fueyo, J. and Avitzur, B., (Abstract) "Limit Analysis of Flow Through Conical Converging Dies," Proc. Second Canadian Congress of Applied Mechanics, May 20-23, 1969, Univ. of Waterloo Press, pp. 13-14.
    27. Avitzur, B. and Kahlow, K. (Invited Article) "Pressure Induced Ductility - the Hydrostatic Extrusion of High Strength Steel," Current Eng. Practice J. of India, June 1969, pp. 1-13.
    28. Avitzur, B., "Limit Analysis of Disc and Strip Forging," Int. J. of tool Design and Research, Pergamon Press, Vol. 9, No. 2, June 1969, pp. 165-195.
    29. Avitzur, Boaz and Betzalel, "Fluid Pressure Control in High Pressure Metal Forming Equipment," Proc. of the 25th National Conf. on Fluid Power in Chicago, Oct. 15-16, 1969, Vol. 23, pp. 90-98. Published by IITRI, Chicago, 1969.
    30. Avitzur, B. and Evans, W., "Metal Flow Through Converging Dies," The Wire Journal, Vol. 2, No.11, Nov. 1969, pp. 60-66.
    31. Zimerman, Z. and Avitzur, B., "Metal Flow Through Conical Converging Dies - A Lower Upper Bound Approach Using Generalized Boundaries of the Plastic Zone," Trans. ASME, Series B, Vol. 92, No. 1, Feb. 1970, pp. 119-129.
    32. Zimerman, Z. and Avitzur B., "Analysis of the Effect of Strain Hardening on Central Bursting Defects in Drawing and Extrusion," Trans. ASME, Series B, Vol. 92, No. 1, Feb. 1970, pp. 135-145.
    33. Avitzur, Boaz and Betzalel, "Pressure-Induced Ductility," Trans. ASME, Series B, Vol. 92, No. 2, May 1970, pp. 419-427. Published by IITRI, Chicago, 1970.
    34. Avitzur, B., "The Production of Bi-Metal Wire," The Wire J.,Vol. 3, No. 8, Aug. 1970, pp. 42-49.
    35. Avitzur, Boaz and Betzalel, "Brittle-to-Ductile Transition Induced by Environmental Pressure," Proc. of the 26th National Conf. on Fluid Power, Chicago, Oct. 13-15, 1970, Vol. 24, pp. 358-368.
    36. Avitzur, B. and Grossman, G., "Hydrodynamic Lubrication in Rolling of Thin Strip," Trans. ASME, Series B, Vol. 94, No. 1, Feb. 1972, pp. 317-328.
    37. Avitzur, B., "Study of Flow Through Conical Converging Dies," Chapt. 1, pp. 1-46, Metal Forming: Interrelation Between Theory and Practice, edited by A. L. Hoffmanner, Plenum Press, NY, 1971.
    38. Avitzur, B., "Die Design for Hydrostatic Extrusion," Manufacturing Eng. Trans., Vol. II, 1973, pp. 177-198.
    39. Avitzur, B., Bishop, E.D. and Hahn, W.C., Jr., "Impact Extrusion -- Upper Bound Analysis of the Early Stage," Trans. ASME, Series B, Vol. 94, No. 4, No. 1972, pp. 1079- 1086.
    40. Hahn, W.C., Jr., Avitzur, B. and Bishop, E.D., "Impact Extrusion -- Upper Bound Analysis of the End of the Stroke," Trans. ASME, Series B, Vol. 95, No. 3, Aug. 1973, pp. 849-857.
    41. Zoerner, W., Austen, A. and Avitzur, B., "Hydrostatic Extrusion of Hard Core Clad Rod," Trans. ASME, Series D, Vol. 94, No. 1, March 1972, pp. 78-80.
    42. Avitzur, B., "Tensile Strength of Composite Materials," Trans. ASME, Series B, Vol. 95, No. 3, Aug. 1973. See Refs. 42 and 43. "Part I - Upper Bound Analysis," pp. 827-834.
    43. Avitzur, B., "Tensile Strength of Composite Materials," Trans. ASME, Series B, Vol. 95, No. 3, Aug. 1973. See Refs. 42 and 43. "Part II - Interpretation of Analysis," pp. 835-843.
    44. Avitzur, B., "The Effect of Holes, Inclusions, and Pressure on Tensile Properties of Metals," AIME Conf. Proc.on Failure Modes in Composites, edited by I.Toth, 1973, pp. 11- 34.
    45. Rozovsky, E., Hahn, W.C., Jr. and Avitzur, B., "The Behavior of Particles During Plastic Deformation," Met. Trans. of the ASM-AIME, Vol. 4, No. 4, April 1973, pp. 927-930.
    46. Avitzur, B., "Approximation of Composite Material Strength," Proc. of the North American Metalworking Research Conf. (NAMRC II), May 1974, pp. 315-327. Presented at the Sym. on Metal Matrix Composite Materials, Liverpool Polytechnic on Nov. 23-24, 1972. Appears in the proceedings.
    47. Powell, G. and Avitzur, B., "Forming of Tubes by Hydraulic Pressure," Vol. 1 (Metal Forming), 1973, Proc. of the North American Metalworking Conf., pp. 63-83. (IMF Report, Nov. 1971).
    48. Avitzur, B., "Bulge in Hollow Disk Forging," Air Force Materials Lab. Tech. Report AFML-TR-69-261, Nov. 1969. Lehigh Univ. Report, Aug. 1969.
    49. Kahlow, K.J. and Avitzur, B., "Void Behavior as Influenced by Pressure and Plastic Deformation," Trans. ASME, Series B, Vol. 96, No. 3, Aug. 1974, pp. 901-911.
    50. Austen, A. and Avitzur, B., "Influence of Hydrostatic Pressure on Void Formation at Hard Particles," Trans. ASME, Series B, Vol. 96, No. 4, Nov. 1974, pp. 1192-1196.
    51. Avitzur, B., "The Application of Hydrodynamic Lubrication to Rolling of Thin Strip," Proc. of the Int. Conf. on Prod. Eng., Part I, Tokyo, Japan, 1974, pp. 390-395.
    52. Rozovsky, E., Hahn, W.C., Jr. and Avitzur, B., "Behavior of Particles and Pore Opening During Plastic Deformation of Metals," Proc. of the Third Int. Conf. on the Strength of Metals and Alloys, Entitled, "The Microstructure and Design of Alloys," Vol. 1, Paper No. 74, 1973, pp. 365-369.
    53. Avitzur, B. and Blum, P., "Forging and Extrusion of P/M Preforms," Modern Developments in Powder Metallurgy, Vol. 7, 1974, pp. 73-90.
    54. Iscovici, S. and Avitzur, B., "Necessary Conditions for Homogeneous Deformation of Composite Material in Uniaxial Tension," Trans. ASME, Series B, Vol. 97, No. 1, Feb. 1975, pp. 182-189.
    55. Avitzur, B., "New Improved Criterion for the Prevention of Central Burst Defects in Wire Drawing and Extrusion," The Wire J., Nov. 1974, pp. 77-86.
    56. Avitzur, B., Hahn, W.C., Jr. and Iscovici, S., "Limit Analysis of Flow Through Conical Converging Dies," J. of the Franklin Inst., Vol. 299, No. 5, May 1975, pp. 339-358.
    57. Barker, K., Hahn, W.C., Jr. and Avitzur, B., "An Analytical Determination of Friction for Flow Through Conical Converging Dies," J. of the Franklin Inst., Vol. 301, No. 5, May 1975, pp. 263-277.
    58. Avitzur, B., Hahn, W.C., Jr. and Mori, M., "Analysis of Combined Backward-Forward Extrusion," Trans. ASME, Series B, Vol. 98, No. 2, May 1976, pp. 438-445.
    59. Story, J.M., Avitzur, B. and Hahn, W.C., Jr., "The Effect of Receiver Pressure on the Observed Flow Pattern in Hydrostatic Extrusion of Bi-Metal Rods," Trans. ASME, Series B, Vol. 98, No. 3, Aug. 1976, pp. 909-913.
    60. Iscovici, S. and Avitzur, B., "Necessary Conditions for Ductile Flow of a Tensile Composite Rod," J. of Eng. for Ind., Trans. ASME, Series B, Vol. 98, No. 1, Feb. 1976, pp. 272-278.
    61. Avitzur, B., "Extrolling: (Combined Extrusion and Rolling), "Wire Technology, Vol. 3, No. 2, March-April, 1975,pp. 55-58.
    62. Avitzur, B., "Extrolling: A Concept for Continuous Wire Making Machines," Presented at the Society of Manufacturing Engineers (SME) in Detroit at the Int. Tool and Manufacturing Exposition and Eng. Conf., April 1975. Paper No. MF75-140.
    63. Avitzur, B., "Extrolling: Combined Extrusion and Rolling," The Wire Journal, July 1975, pp. 73-80.
    64. Avitzur, B., "Recent Developments of Continuous Wire making Machines," Society of Manufacturing Eng. (SME), Paper No. MF76-143, presented in Philadelphia at seminar on Manufacturing of Wire, Feb. 10-12, 1976. Also printed in Wire Tech., Vol. 4, No. 3, 5/1:1976, pp. 33-36.
    65. Kohser, R.A. and Avitzur, B., "Quantitative Friction Determination Through Forging - A New Approach," Proc. of the Fourth North American Metalworking Research Conf. (NAMRC IV), May 17-19, 1976, Columbus, OH, pp. 123-129.
    66. Avitzur, B., "Analysis of Metal Flow Through Conical Converging Dies as an Adiabatic Process," Proc. of the Fourth North American Metalworking Research Conf. (NAMRC IV), May 17- 19, 1976, Columbus, OH, pp. 206-212.
    67. Avitzur, B., "The Application of Hydrodynamic Lubrication in Wire Drawing and Extrusion," The Wire Journal, June 1976, pp. 74-79.
    68. Avitzur, B. and Feilbach, W.H., "Strength and Deformation Behavior of Metals Viewed as Composites," Proc. of the Fourth Int. Conf. on the Strength of Metals and Alloys, Vol. 2, pp. 654-658, Aug. 30-Sept. 3, 1976, Nancy, France.
    69. Avitzur, B., "Flow Through Conical Converging Dies with Hydro-dynamic Lubrication Treated as an Adiabatic Process," Proc. of the 17th Int. Machine Tool Design and Research Conf, Sept. 20-24, 1976, Birmingham, England. Published by MacMillan Press Ltd., pp. 445-451. Translated into Polish, Metalurgia l Odlewnictwo (Metallurgy and Casting), Scientific Papers of the Academy of Mining and Metallurgy, Krakow, Poland, Vol. 5, No. 1, 1979, pp. 101-126.
    70. Avitzur, B. and Kohser, R.A., "Disc and Strip Forging for the Determination of Friction and Flow Strength Values," ASLE Trans., Vol. 21, No. 2, April 1978, pp. 143-151. Proc. ASLE 32nd Annual Meeting, Montreal, Canada, May 9-12, 1977, Paper No. 77-AM-2B-1. ASME Paper No. 76-WA/Prod-7. Also, the J. of Eng. Prod. by the Indian Soc. of Mech. Eng., Vol. 1, No. 2, June 1977, pp. 105-120.
    71. Avitzur, B., Gordon, P.F. and McDermott, R.P., "Comparative Analysis of Extrusion Dies for Cold Heading Production," Proc. of the Fifth North American Metalworking Research Conf. (NAMRC V), May 22-25, 1977, Univ. of Massachusetts, Amherst, pp. 171-178.
    72. Avitzur, B., "Extrolling: A New Process for Continuous Wire-making," Manufacturing Eng. Trans., Vol. IV, 1977, pp. 39-58.
    73. Avitzur, B., "Metal Forming: The Application of Limit Analysis," Ann. Rev. Material Science, Vol. 7, Aug. 1977, Palo Alto, pp. 261-300.
    74. Avitzur, B., "Ironing with Unlimited Reduction," Proc. of the 18th Int. Machine Tool Design & Research Conf. (MTDR), Sept. 14-16, 1977, Imperial College, London, England, pp. 145-150.
    75. Avitzur, B., Van Tyne, C.J. and Umana, C., "Analytical Determination of the Sensitivity of the Ring Test as an Experimental Study of Friction," Proc. of the 18th Int. Machine Tool Design & Research Conf. (MTDR, Sept. 14-16, 1977, Imperial College, London, England, pp. 305-313.
    76. Talbert, S.H. and Avitzur, B., "The Strength of Composite Materials Loaded in Uniaxial Tension Under Pressure," The J. of the Franklin Inst., Vol. 303, No. 6, June 1977, pp. 563-581.
    77. Avitzur, B., "Extrolling: Update 1977," Wire Journal, March 1978, pp. 78-84. Presented at the 47th Annual Convention of the Wire Assoc. Int., Inc., Boston, MA, Oct. 17, 1977.
    78. Avitzur, B., Iobst, J. and McDermott, R.P., "Axiform -- A Computer Simulation Program for Axisymmetric Forging & Extrusion," Proc. of the VI NAMRC (North American Metalworking Conf.), Gainesville, FL, April 1978,pp.174-179.
    79. Kiuchi, M. and Avitzur, B., "Limit Analysis of Flow Through Inclined Converging Planes," Proc. of the 1978 Japan Spring Conf. for Tech. of Plasticity, sponsored by Japan Society for Tech. of Plasticity (JSTP) and Japan Society for Mech. Engrg (JSME), May 17-19, 1978, Hiroshima, Japan, Paper No. 420, pp. 533-538.
    80. Avitzur, B. and Sauerwine, F., "Limit Analysis of Hollow Disc Forging, Part 1: Upper Bound," Trans. ASME, J. of Eng. for Ind., Vol. 100, No. 3, Aug. 1978, pp. 340-346. ASME Paper No. 77-WA/PROD-2, presented at the ASME Winter Annual Meeting, Atlanta, GA, Nov. 27-Dec. 2, 1977. Also, Air Force Report AFML-TR-69-261, Nov. 1969.
    81. Sauerwine, F. and Avitzur, B., "Limit Analysis of Hollow Disc Forging, Part 2: Lower Bound," Trans. ASME, J. of Eng. for Industry, Vol. 100, No. 3, Aug. 1978, pp. 347-355. ASME Paper No. 77-WA/PROD-3 presented at the ASME Winter Annual Meeting in Atlanta, GA, Nov. 27-Dec. 2, 1977.
    82. Avitzur, B. and Umana, C.E., "Effects and Application of Geometry Variations on the Combined Forward-Backward Extrusion," Proc. of the ASME Conf. on 'Application of Numerical Methods of Forming Processes', AMD-Vol. 28, pp. 175-182, presented at the Winter Annual Meeting of the American Soc. of Mech. Engineers, San Francisco, CA, Dec. 10-15, 1978.
    83. Boer, C.B., Schneider, W.R., Eliasson, B. and Avitzur, B., "An Upper Bound Approach for the Direct Drawing of Square Section Rod from Round Bar," Proc. of the 20th Int. Machine Tool Design & Res. Conf. (MTDR), Sept. 1979, England, pp. 149-156.
    84. Avitzur, B. and Kohser, R., "Disk and Strip Forging with Side- Surface Fold Over - Part 1: Velocity Field and Upper Bound Solutions," Trans. ASME, J. of Eng. for Ind., Vol. 100, No. 4, Nov. 1978, pp. 241-247, ASME Paper No. 77- WA/PROD-36. Presented at the ASME Winter Annual Meeting in Atlanta, GA, Nov. 27-Dec. 2, 1977.
    85. Kohser, R. and Avitzur, B., "Disk and Strip Forging with Side-Surface Fold Over - Part 2: Evaluation of the Upper Bound Solutions," Trans. ASME, J. of Eng. for Ind., Vol. 100, No. 4, Nov. 1978, pp. 428-433, ASME Paper No. 77-WA/PROD-37. Presented at the ASME Winter Annual Meeting in Atlanta, GA, Nov. 27-Dec. 2, 1977.
    86. Kiuchi, M. and Avitzur, B., "Limit Analysis of Flow Through Inclined Converging Planes," Trans. ASME, J. of Eng. for Ind., Vol. 102, No. 2, May 1980, pp. 109-117, ASME Paper No. 79-WA/PROD-10. Presented at the ASME Winter Annual Meeting in NY on Dec. 3, 1979.
    87. Kudo, H., Avitzur, B., Yoshikai, T., Luksza, J., Moriyasu, M. and Ito, S., "Cold Forging of Hollow Cylindrical Components Having an Intermediate Flange - UBET Analysis and Experiment," Annals of the CIRP, Vol. 29/1/1980, pp. 129-133, presented at the CIRP Conf. in Australia, Sept. 1980.
    88. Avitzur, B., "Friction-Aided Strip Rolling with Unlimited Reduction," Int. J. Mach. Tool Design & Research (MTDR), Vol. 20, pp. 197-210, Pergamon Press Ltd., 1980.
    89. Avitzur, B. and Nowakowski, A., "Analysis of Strip Rolling as an Adiabatic Process," Proc. of the 21st MTDR Conf. at the Un. College of Swansea, England, Sept. 10-12, 1980, pp.29-32.
    90. Avitzur, B._ and Van Tyne, C., "Ring Forming: An Upper Bound Approach - Part I: Flow Pattern and Calculation of Power," ASME Paper No. 82 Prod.-3, Presented at the Annual Meeting in Washington, Sept. 12-15, 1982. Trans. ASME, J. of Eng.for Ind., Vol. 104, No. 3, Aug. 1982, pp. 231-237.
    91. Avitzur, B._ and Van Tyne, C., "Ring Forming: An Upper Bound Approach - Part II: Process Analysis and Characteristics," ASME Paper No. 82-PROD-4, Presented at the Annual Meeting in Washington, Sept. 12-15, 1982, Trans. ASME, J. of Eng. for Ind., Vol. 104, No. 3, Aug. 1982, pp. 238-247.
    92. Avitzur, B._ and Van Tyne, C., "Ring Forming: An Upper Bound Approach - Part III: Constrained Forging and Deep Drawing Applications," ASME Paper No. 82-Prod-5, Presented at the Annual Meeting in Washington, Sept. 12-15, 1982, Trans. ASME, J. of Eng. for Ind., Vol. 104, No. 3, Aug. 1982, pp. 248-252.
    93. Avitzur, B., "Limit Analysis of Flow Through Conical Converging Dies," Metallurgia Italiana No. 9-1981, pp. 385-410. Presented as a keynote lecture at the XIX Congress of the National AIM (Assoc. of Italian Met.) in Torino on Oct. 30-31, 1980.
    94. Avitzur, B. and Ache, L., "Energy Considerations in the Forging Industry," Proc. of the 9th NAMRC Conf., Penn State Univ., May 19-22, 1981, pp. 170-177.
    95. Thadani, V., Avitzur, B., Chou, Y.T. and Luhman, T.S., "A Comparison of Hydrostatic Extrusion versus Drawing as a Method of Producing Nb3Sn Superconducting Wire," Proc. of 9th NAMRC Conf., Penn State Univ., May 19-22, 1981, pp. 178-191.
    96. Hazelton, D.W., Schwall, R.E., Avitzur, B. and Verhoeven, J.D., "Hydrostatic Extrusion of In Situ Process Superconductive Wire for Use in NMR Magnets," Proc. of the 1981 ICMC-CEC Conf., San Diego, CA, Aug. 10-14, Plenum Press, Vol. 28, Advances in Cryogenic Eng. Mat. (ed. by Reed, R.P. and Clark, A.F.), pp. 545-553.
    97. Avitzur, B., "Limit Analysis in Metal Forming - Application to the Flow-Through Conical Converging Dies," Vol. 3 of the Proc. Prod. Eng. Div. of the Am. Soc. of Mech. Eng., presented at the Winter Annual Meeting of the ASME, Nov. 15-20, 1981, pp. 167-197.
    98. Avitzur, B., "Wire Drawing - Theoretical Considerations," Chapter 1 of Nonferrous Wire Handbook, Vol. 2: Bare Wire Processing (Edited by Tassi, O.J.), published by The Wire Association Int., Inc., Guilford, CT, 1981, pp. 1-26.
    99. Avitzur, B., "Alternate Manufacturing Technologies for the Production of Multifilamentary Superconducting Wire by the External Bronze Technique," Proc. of the North American Manufacturing Research Conf. (NAMRC X), pp. 218-224. Pub. by the SME, 1982. Presented at the 1982 NAMRC Conf. in Hamilton, Canada on May 24-26, 1982. Also available as TMS Paper No. A82-18 from the TMS-AIME paper selection program.
    100. Avitzur, B. and Dutton, R., "Contribution to Mathematical Modeling of Cup Drawing: The Upper-Bound Analysis for Inward Pull (Case II) in Ring Forming," Int. J. of Machine Tool Design & Research, Vol. 23, No. 2/3, pp. 93-109, 1983.
    101. Avitzur, B., "Upper Bound Analysis of Deep Drawing," Proc. of the North American Manufacturing Research Conf. (NAMRC X), pp. 157-164. Published by the SME 1982. Presented at the 1982 NAMRC Conf. in Hamilton, Canada, May 24-26, 1982.
    102. Luo, Z.J. and Avitzur, B., "Limitations of the Impact Extrusion Process," Int. J. of Mach. Tool Design & Research, Vol. 22, No. 1, pp. 41-56, 1982.
    103. Avitzur, B., Wu, R., Talbert, S. and Chou, Y.T., "Criterion for the Prevention of Core Fracture During Extrusion of Bi-Metal Rod," ASME Paper No. 82-PROD-13. Presented at the Annual Meeting in Washington, Sept. 12-15, 1982. Trans. ASME, J. Eng. for Ind., Vol. 104, No. 3, August 1982, pp. 293-304.
    104. Luo, Z.J. and Avitzur, B., "Deep Drawing by Contoured Dies," Proc. of the North American Manufacturing Research Conf. (NAMRC X), pp. 165-172. Published by the SME, 1982. Presented at the 1982 NAMRC Conf. in Hamilton, Canada on May 24-26, 1982. Int. Deep Drawing Res. Group (IDDRG), Milan, Italy, May 27-28, 1982.
    105. Avitzur, B., Chou, Y.T. and Narayan, C., "Upper-Bound Solutions to Flow through Conical Converging Dies," Int. J. Mach. Tool Design Research, Vol. 22, No. 3, pp. 197-214, Pergamon Press Ltd., 1982.
    106. Avitzur, B., "Study of Flow Through Converging Dies," Wire Ind. J., Chandlers Ltd., Bexhill-On-Sea, E. Sussex, England. Part 1, June 1982, pp. 449-454 & 457.
    107. Avitzur, B., "Study of Flow Through Converging Dies," Wire Ind. J., Chandlers Ltd., Bexhill-On-Sea, E. Sussex, England. Part 2, July 1982, pp. 503-509.
    108. Avitzur, B., "Study of Flow Through Converging Dies," Wire Ind. J., Chandlers Ltd., Bexhill-On-Sea, E. Sussex, England. Part 3, Aug. 1982, pp. 613-619.
    109. Luo, Z.J. and Avitzur, B., "Deep Drawing with Contoured Die," Proc. Int. Conf. on Numerical Methods in Industrial Forming Proc., Univ. College, Swansea, UK, July 12-16, 1982. Edited by Pittman, J.F.T., Wood, R.D., Alexander, J.M., Zienkiewicz, O.C. Pine ridge Press, Swansea, Printed Redwood Burn Ltd., UK, pp. 653-667.
    110. Avitzur, B., "Friction Aided Metal Forming Processes with Unlimited Reductions," Proc. Mech. Design and Prod. Conf., Cairo, Egypt, Dec. 27-29, 1982, pp. 881-893.
    111. Thadani, V., Luhman, T.S., Avitzur, B. and Chou, Y.T., "Superconducting and Mechanical Properties of Cold Hydrostatically Extruded Monofilamentary Nb3Sn Wires," Proc. 1981 ICMC-CEC Conf., San Diego, CA, Aug. 10-14. Plenum Press, Vol. 28, Advances in Cryogenic Eng. Mat., pp. 681-688.
    112. Avitzur, B., "Drawing of Heavy Wall Tubing with Floating Plugs," J. of Applied Metalworking, ASM, Vol. 2, No. 4, Jan. 1983, pp. 258-263. Also, Tube International, Vol. 2, No. 3 Sept. 1983, pp. 137-140, published by Magnum Pub. Ltd., Oxted, Surrey, RH8 OQA. Proc. of Tube/Asia 82 Conf.,Singapore, Oct. 4-8, 1982, pp. T1/A/1-T1/A/14, (157 Station Rd. E., Oxford, Surrey, RH8OQF, England).
    113. Avitzur, B., Wu, R.S., Talbert, S. and Chou, Y.T., "Criterion for the Prevention of Core Fracture During Extrusion of Bi-Metal Rods," Proc. of the Int. Symposium 'Metal Forming 1982' held in Krakow, Poland on Sept. 16-17, 1982. Published in Metallurgy and Casting (Quarterly), Vol. 8, No. 2 of the Academy of Mining and Metallurgy (AGH) Krakow, pp. 193-214 (in English with Polish translation and a Russian abstract). Published also in the Trans. ASME, J. of Eng. for Ind., Aug. 1982, Vol. 104, pp. 293-304. (See Ref. 103).
    114. Avitzur, B., "Review of the State of the Art in the Study of Flow Through Conical Converging Dies," presented as keynote address at the Developments in the Drawing of Metals Conf. of The Metals Society, May 11-13, 1983, London, UK, Proc. Developments in the Drawing of Metals, pp. 1-13.
    115. Pachla, W., Pan, J.Z., Rosenberry, S. and Avitzur, B., "Color Real-Time Graphic Simulation of Flow Through Conical Converging Dies by the Triangular Velocity Field," presented at the Developments in the Drawing of Metals Conf. of The Metals Society, May 11-13, 1983, London, UK, Proc Developments in the Drawing of Metals, pp. 63-75.
    116. Pachla, W., Pan, J.Z., Rosenberry, S. and Avitzur, B., "Analysis of the Triangular Velocity Field by the Computer Graphic Simulation," presented at the North American Manufacturing Research Conf. (NAMRC XI), May 24-25, 1983, Univ. of Wisconsin-Madison, Wisconsin, Proc. of NAMRC XI,pp. 232-237.
    117. Pan, J.Z., Pachla, W., Rosenberry, S. and Avitzur, B., "The Study of Distorted Grid Patterns for Flow Through Conical Converging Dies by the Multi-Triangular Velocity Field," Trans. ASME, J. of Eng. for Ind., Vol. 106, No. 2, May 1984, pp. 150-160.
    118. Avitzur, B. and Pan, J.Z., "Cylinder Under Combined Axial and Torsion Load," Int. J. Machine Tool Design and Research (MTDR), Vol. 25, No. 3, pp. 269-284, Pergamon Press Ltd., Manchester, England, 1985.
    119. Murakawa, M. and Avitzur, B., "An Upper Bound Approach to a Problem of Orthogonal Cutting," withdrawn from publication.
    120. Pan, J.Z., Avitzur, B., Chou, Y.T. and Suenaga, M., "Manufacture and Superconducting Properties of Bronze- Processed Nb3Sn Monofilamentary Wires with Be Additions," Adv. Cryog. Eng., Vol. 30, pp. 755-762 (1984). Presented at the ICMC (Int. Cryogenic Materials Conf.) held Aug.15-19, 1983, Colorado Springs, CO.
    121. Ritter, N. and Avitzur, B., "ConDie Process", Proc. of the IX AIRAPT High Pressure in Science and Tech. Int. Conf., State Univ. of NY, Albany, NY, July 25-28, 1983, Vol. 22, Part II, Fluids, Engineering and Safety, published by North Holland, pp. 307-310.
    122. Avitzur, B., Wu, R.S., Talbert, S. and Chou, Y.T., "An Analytical Approach to the Problem of Core Fracture During Extrusion of Bi-Metal Rod," Trans. ASME, J. of Eng. for Ind., Series B, Vol. 107, No. 3, Aug. 1985, pp. 247-253, Paper No. 85-WA/PROD-6.
    123. Avitzur, B., Wu, R.S., Talbert, S. and Chou, Y.T., "Analysis of Core Fracture in Drawing of Bi-Metal Rods and Wire," Trans. ASME, J. of Eng. for Ind., Series B, Vol. 108, No. 2, May 1986, pp. 133-140, Paper No. F-18-84.
    124. Avitzur, B., Wu, R.S., Talbert, S. and Chou, Y.T., "Criterion for the Prevention of Sleeve Fracture During Extrusion of Bimetal Rods," Trans. ASME, J. of Eng. for Ind.,Aug. 1986, Vol. 108, pp. 205-212.
    125. Avitzur, B., "Review of the State of the Art in the Study of Flow Through Conical Converging Dies," published in the Proc. ASM Conf. on 'Advances in the Production of Tubes, Bars and Shapes', held Nov. 7-8, 1983 in Memphis, TN. Printed by Publishers Choice Book Mfg. Co., Mars, PA, pp. 1-11.
    126. Sculac, J. and Avitzur, B., "Sublayer Defects," published in J. of Mechanical Working Technology, Elsevier Science Publishers, B.V., The Netherlands, June 1984, Vol. 10, No. 1, pp. 77-86.
    127. Avitzur, B., Van Tyne, C.J., Luo, Z.J. and Tang, C.R., "A Model for Simulation of Friction Phenomenon Between Dies and Workpiece," Proc., 1st. Int. Conf. on Technology of Plasticity (ICTP), Tokyo, Japan, Sept. 3-7, 1984, pp. 200-207.
    128. Avitzur, B., "Analysis of Flow Through Conical Converging Dies - Update 1984," Presented as Keynote Paper at the 1st. Int. Conf. on Technology of Plasticity (ICTP), Tokyo, Japan, Sept. 3-7, 1984. Published in Proc., 1st ICTP, pp. 948-960.
    129. Ritter, N. and Avitzur, B., "Automation of the ConDie Process," published in Proc. of NAMRC XII, SME Pub., Dearborn, MI, May 30-June 1, 1984, pp. 100-102.
    130. Avitzur, B., Huang, C.K. and Zhu, Y.D., "A Friction Model Based on the Upper-Bound Approach to the Ridge and Sublayer Deformations," WEAR, Vol. 95, No. 1. Published by Elsevier Oxford, UK, 1984, pp. 59-77.
    131. Avitzur, B. and Pachla, W., "The Upper Bound Approach to Plane Strain Problems Using Linear and Rotational Velocity Fields,: Part I: Basic Concepts," Paper #86-WA/Ppod-7.Trans. ASME, J. Engineering for Ind., Nov. 1986, Vol. 108,No. 4, pp. 295- 306.
    132. Avitzur, B. and Pachla, W., "The Upper Bound Approach to Plane Strain Problems Using Linear and Rotational Velocity Fields,: Part II: Applications," Paper # 86-wa/Prod-8. Trans. ASME, J. Engineering for Ind., Nov. 1986, Vol. 108, No. 4, pp. 307-316.
    133. Avitzur, B. " Metal Forming"PDF, a chapter in the Ency. of Phys. Sci. & Tech., Vol. 8, Academic Press, Inc., 1250 Sixth Ave. San Diego, Ca. 92101, 1987, pp. 80-109.
    134. Avitzur, B. and Zhu, Y.D., "A Friction Model Based on the Upper-Bound Approach to the Ridge and Sublayer Deformations -Update," Presented at NAMRC XIII, May 19-22, 1985 in Berkeley, CA and published in the proceedings, SME, pp. 103-109.
    135. Avitzur, B. and Choi, J.C., "Compatibility of the Upper-Bound Approach and the Balance of Forces for the Treatment of Metal Forming Processes," published in the J. of Mechanical Working Technology, 13(1986), pp. 141-150.
    136. Avitzur, B. and Choi, J.C., "Analysis of Central Bursting Defects in Plane Strain Drawing and Extrusion," Paper #86-WA/Prod-4. Trans. ASME, J. Engineering for Ind., Nov. 1986, Vol. 108, No. 4, pp. 317-321.
    137. Avitzur, B. and Nakamura, Y., "Analytical Determination of Friction Resistance as a Function of Normal Load and Geometry of Surface Irregularities," published in WEAR, Vol. 107, No. 4, pp. 367-383, 1986.
    138. Avitzur, B., Nakamura, Y. and Zhu, Y.D., "Analytical Simulation of Friction Resistance Modeled by Ridge Mobility," presented at '85 ASM's Int. Conf. on Surface Modifications and Coatings (Materials Week '85), Toronto, Canada, Oct. 14- 16, 1985, Paper No. 8512-006, pp. 245-253.
    139. Avitzur, B., "New Trends in Metal Forming," Proc. of the 3rd. Cairo Univ. Int. Conf. on Mech. Design and Production, heldin Hotel Marriott, Cairo, Egypt, Dec. 28-30, 1985, pp. 317-336.
    140. Avitzur, B., Choi, J.C. and Kim, B.M., "Upper Bound Solutions for Several Metal Forming Processes," presented at NAMRC XIV, May 28-30, 1986, Univ. of Minnesota, Minneapolis, MN, pp. 406-413.
    141. Avitzur, B., and Christian, C. "The Use of the Personal Computer for Simulation of Metal Forming Processes in an Interactive User Friendly Mode", Proceedings of the ME workshop on Practical and cost effective Tube Fabrication Technology, held in Ann-Arbor, Mich. on March 24-26, 1987. paper #7.
    142. Avitzur, B., and Stefanik, J., "Personal Computers in Metal Forming," Wire Industry, Mar. 1987, No. 3 pp. 183-185. (not subjected to proof reading by Authors).
    143. Avitzur, B., Choi, J. C., & Kim, J. M., "Application of Force Balance Method to Several Metal Forming Problems," Proceedings of NAMRC 15, Lehigh Un. Bethlehem, Pa., May 27-29, 1987. PP. 269-277.
    144. Bay, N., Wanheim, T., and Avitzur, B. "Modeling of Friction in Metal Forming," Proceedings of NAMRC 15, Lehigh Un., Bethlehem Pa., May 27-29, 1987, PP. 372-379.
    145. Avitzur, B., and Jones, a., "Software for Numerical Solutions of Two Dimensional Forming Processes for Today's P/C's." Proceedings of IMACS, Intr. Ass. for Math. and Computers in Simulation. Advances in Computer Methods for Partial Differential Eqs.-VI, Jun.23-25, 1987, Lehigh Un. Bethlehem, Pa. Published by IMACS Dept. of Computer Sc. Rotgers Un. New Brunswick, N. J. 08903, pp. 336-337.
    146. Avitzur, B. and Stefanik, J., "The Use of the Personal Computer for Simulation of Metal Forming Processes in an Interactive, User Friendly Mode", Proceedings of the International "Metal Forming '87" conference held in Krakow, Poland, Sept. 16-18, 1987. Printed by the Stanislaw Staszic Acad. of Mining and Metallurgy, Krakow. Bulletin 110, Nr. 1152, pp. 11-18.
    147. Avitzur, B. "A Model for the Characterization of Friction Resistance to Sliding as a Function of Load, Speed and Viscosity, and Geometry." Proceedings of the 2nd Int. Conf. on Tech. of Plasticity, held in Stuttgart, W. GERMANY, on Aug. 24-28, 1987. pp.883-892.
    148. Avitzur, B., Gordon, W., and Talbert, S., "Analysis of Strip Rolling by the Upper Bound Approach." - Transactions of the ASME. Jr. of Engineering for Ind., Vol. 109, No. 4, Nov. 1987, pp. 338-346.
    149. Avitzur, B., "Multi-Disciplinary Approach to the Understanding and Modeling of the Friction Phenomenon. "printed in Vol. 1 of the Proceedings of the Am. Soc. of Mech. Engrg. (ASME), entitled: "Interdisciplinary Issues in Materials Processing and Manufacturing." Presented at the Winter Annual Meeting (WAM), Dec. 13-18, 1987, pp. 189-199.
    150. Avitzur, B., Choi, J. C., and Kim, J. M., "The Unity of Upper-Bound Approaches to Plane Strain Deformation Problems," Jr. of Mech. Working Technology, 15 (1987) elsevier Science Publishers B. V. Amsterdam. pp. 297-307.
    151. Sculac, J., Liu, Q.F. and Avitzur, B., "Modeling of Failure During Metal Forming Processes," Proceedings of the symposium on "Physical Modeling of Metalworking Processes," sponsored by the TMS-AIME Shaping and Forming Committee and held at the TMS Annual Meeting in Denver, Colorado, Feb. 24-27, 1987., Edited by Erman, E., and Semiatin, S. L.. Published by the Metallurgical Society.PP. 163-174.
    152. Zhu, Y. D., and Avitzur, B., "Criterion for Prevention of Split Ends in Strip Rolling." - Transactions of the ASME, Jr. of Engineering for Industry. Vol. 110, May 1988, pp.162-172. Submitted for consideration for publication Mar. 31, 1987.
    153. Avitzur, B., Van Tyne, C. T., and Turzyn, S., " The Prevention of Central Burst in Strip Rolling" - Transactions of the ASME, Jr. of Engineering for Industry. Vol. 110, May 1988, pp. 173-178. Submitted for consideration for publication Apr. 1987.
    154. Avitzur, B. and Kowalsky, G., "Analytical Model of High Strain-Rate Expansion of Hollow Cylinder". Jr. of Mechanical Working Technology, Vol. 16, No. 3, June 1988 ISSN: 0378-3804, Elsevier Science Publishers B.V. Amsterdam pp. 299-313. Submitted for consideration for publication July 1987.
    155. Avitzur, B., "Interrelation Between the Asperities and the Trapped Lubricant, and their Effect on Friction Behaviour," proceedings #MD-Vol. 10, pp. 1-11 of the ASME Winter Annual Meeting, Chicago, Nov. 28th to Dec. 2nd l988. Printed by the ASME, 345 East 47th St. New York, NY l00l7. Edited by I. Hague et.al.
    156. Avitzur, B., "The Effect of Surface Irregularities, Subsurface Layers, Pressure, Lubrication, and Sliding Speed on Friction Resistance in Metals." A chapter in a Volume on "The Role of Subsurface Zones in the Wear of Materials." Edited by R. Solecki, and published by Trans Tech Publication Ltd., a Swiss based company. 1988, pp. 1-16.
    157. Notis, M. R., Oh, M. S., Avitzur, B., Liu, Q. F., and Jain, H. "Fabrication and Characterization of Ceramic Superconducting Composite Wire." Proceedings of the 1st Intr. Symposium on Superconductivity (ISS '88), Conf. on Advances in Superconductivity, Aug. 28-31, 1988 Nagoya, JAPAN. published by Springer-Verlag Tokyo 1989. pp. 371-375.
    158. Avitzur, B., " Modeling The Effect of Lubrication on Friction Behavior." Wear Jr. 126 Sep.(1988) pp. 227-249. Published, by Elsevier Sequoia. Netherlands. Received Dec. 7, 1987; Accepted Feb. 1988.
    159. Avitzur, B. and Talbert, S., "Upper-Bound Solutions and the Balance-of-Power Approach." Chapter 2 of the book entitled "Plasticity and Modern Metel-Forming Technology," Edited by Blazynski, and published by Elsevier Applied Sc., 1989. pp. 17-50.
    160. Avitzur, B., "Flow Through (Conical Converging) Dies, Update 1989, Part I - The Analysis." Jr. of the Wire Industry, England, April 1989, pp. 243-249.
    161. Avitzur, B., "Flow Through (Conical Converging) Dies, Update 1989, Part II - Computer simulation." Jr. of the Wire Industry, England, July 1989, pp. 390-393.
    162. Avitzur, B., "Update of Analytical and Numerical Procedures in the Study of Flow Through Conical Converging Dies", Proc. of the Cu'86 Copper Tomorrow Conference, in Barga, Lucca, Italy, Sept. 1986, Published by Europa Metalli-LMI, 50121 Florence (Italy) Borgo Pinti, 99. pp. 54-66.
    163. Avitzur, B., "Survey of UBET Procedures for Axisymetric Forging and Extrusion." Proceedings of the IEXTR Inter. Conf. on Extrusion, In Athen Ohio, Nov. 6-8, 1989. pp. 277-288.
    164. Oh, M., Liu, Q. F., Misiolek, W., Rodrigues, A., Avitzur, B., and Notis, M. "Fabrication and Microstructure of Composite Metal-Clad Ceramic Superconducting Wire." Jr. Am. Ceramic Soc., 72[11] (1989) pp. 2142-47.
    165. Avitzur, B., "Modeling the Effect of Lubrication on Friction Behaviour." Lubrication Science, Vol. 2. No. 2, Jan. 1990, pp. 99-132.
    166. Avitzur, B., "The Use of the Personal Computer for Simulation of the Processes of Wire Drawing and Extrusion in an Interactive, User-Friendly Mode." Proceedings of the Wire89 Inter. Conf. Atlanta, Georgia, Nov. 5-10, 1989. pp. 396-403.
    167. Avitzur, B., and Kay, E., "Surface-Layer Modeling of Friction Using Rotational Motion of Rigid Bodies," Proceedings of the Third Int. Conf. on Tech. of Plasticity (ICTP), Kyoto, Japan, July 1-6, 1990.pp. 981-987.
    168. Avitzur, B., (Key Note), "A Personal Look on My Involvement in the Recent History of Metal Forming Research." Third Intern. Conf. on Tech. of Plasticity (ICTP), Kyoto, Japan. July, 1-6, 1990. pp. 1627-1635.
    169. Avitzur, B., "Boundary and Hydrodynamic Lubrication," Wear, 139 (1990) Elsevier Sequoia, Netherlands, pp. 49-76.
    170. Avitzur, B., "Modeling of Friction Behaviour and Strip Rolling Forces." Proceedings of the 29th Metallurgical Soc. of Canadian Inst. of Mining and Metallurgy, International Symposium Aug. 26-29, 1990 Held in Hamilton Ontario, Edited by S. Yue (CIM/ICM), Published by the Iron and Steel Soc. of AIME 410 Commonwealth drive P.O.Box 411, Warrendale, PA 15086. Section on "Modeling of Hot Rolling of Steel." pp. 300-327.
    171. Avitzur, B., and Styczynski, L., "Production of Ultrafine Wire by Augmented Hydrostatic Extrusion." Proc. of the 1991 NSF Design and Manufacturing Systems Conf., The Un. of Texas, Dept. of Mech. Engrg. Austin, Texas, Jan. 9-11, 1991. pp. 769-777.
    172. Avitzur, B., "Limitations on Wire Size During Drawing and Extrusion." Wire Jr. International, Vol. 25, No. 3, March 1992, pp. 51&endash;56. Published in the Proc. of the 61st. Annual Convention of the Wire Association International, Held in Atlanta, Georgia, Nov. 4-8, 1991. pp. 298-304. Printer: Wire Ass. Int. 1570 Boston Post Rd., P.O.Box H, Guilford, CT 06437 USA.
    173. Avitzur, B., "Prevention of Filament Breaks During Drawing and Extrusion of Multifilamentary Wire." Wire Jr. International, Vol. 25, No. 8, Aug. 1992. PP. 59-65. Reprinted in the Proc. of the 61st. Annual Convention of the Wire Association International, Held in Atlanta, Georgia, Nov. 4-8, 1991. pp. 257-271. Printer: Wire Ass. Int. 1570 Boston Post Rd., P.O.Box H, Guilford, CT 06437 USA.
    174. Avitzur, B., and Talbert, S., "Criteria for the Prevention of Filament and Wire Breaking During the Fabrication of Multifilamentary Composite Superconducting Wire." Presented in a poster Session at the IISSC 3rd. conf. in Atlanta GA. Mar. 13-15, 1991. Published in the Proceedings "Supercollider 3", (Edited by Nonte, J.) pp. 341-354. Printed by Plenum Press, New-York, 1991.
    175. Avitzur, B., Eto, M., and Kay, E., "Rolling Vs. Sliding Friction," Proceeding of the Tribological Aspects in Manufacturing, PED-Vol. 54/TRIB-Vol. 2. Presented as a Key Note paper at the Winter Annual Meeting of the Am. Soc. of Mech. Eng. (ASME) in Dec. 1-6 1991, in Atlanta GE. Edited by Attia, M. H., and Komanduri, R. pp. 165-177.
    176. Styczynski, L., Shi, Jian-jin, and Avitzur, B., "The Effect of Speed on the Individual Components of Wire Drag During Augmented Hydrostatic Extrusion of Fine Wire." Proceedings of the 1992 NSF Design and Manufacturing Systems Conf., Georgia Inst. of Tech. Atlanta GA. Jan. 8-10, 1992 pp. 1117-1123
    177. Avitzur, B., "The Upper Bound Approach to the Friction Wave Model." Jr. of Material Processing Technology, 34 (1992) pp. 201-209. Presented at the Metalforming '92 conf. in Krakow, Poland on Sept. 24, 1992., published by Elsevier Sc. Publishers.
    178. Avitzur, B., Eto, M., and Kay, E., "Treating Rolling Vs. Sliding Friction by the Wave Model." Wear, 156 (1992) pp. 211-237. Elsevier Sequoia.
    179. Avitzur, B., "Friction During Metal Forming." Vol. 18 of the ASM Metals Handbook: Friction, Lubrication and Wear Technology. (Edited by Dr. Peter Blau). First printing, Oct. 1992, pp. 58-69.
    180. Avitzur, B., Simchon, M., and Shi, Jian-Jin, "Wet Fine Wire Drawing with Slip," Wire Jr. Intr. Vol. 27, No. 1, Jan. 1994. pp.46-55. Proc. of the 1993 Conf., 63rd. Ann. Convention of the Wire Ass. Int. in Atlanta GA. Mar. 22-26, 1993. pp. 61-70.
    181. Avitzur, B., "The Hydrodynamic Model of Sliding Inclined Planes and Its Two Limits: Coulomb/Amonton Friction and Fluid Slug Rigid Body Flow." Tribology Transactions of the Society of Tribology and Lubrication Engineers (STLE) Vol. 36 (1993), 2, pp. 249-257. Presented at the STLE Conf. in Montreal Canada, May 2, 1991.
    182. Avitzur, B., "Plastic Working in USA and Related Environmental Issues," Proc. of the Forum for International Community, Technology of Plasticity for One Earth, Published by the JSTP, May 1993, pp. 93-104.
    183. Avitzur, B., "The Upper Bound-Approach to the Friction Wave Model, Update'93", Proc. of the JSTP, 1993. Separate document. Updated in Advanced Technology of Plasticity 1993 Proceedings of the Fourth International Conf. on Technology of Plasticity (ICTP 4) Vol. 1, Published by the International Academic Publishers, The Printing House of China Building Industry Press,1993, pp. 320-329.
    184. Avitzur, B., Kimmel, J., and Szulc, W., " Analysis of Friction and Pressure Distributions Along the Die During Plane-Strain Drawing."Jr.of Material Processing Technology, Vol. 39 - Nos. 3-4, Nov. 1993, pp. 415-430. Submitted for consideration for publication Aug. 1992.
    185. Avitzur, B., Jin, J., and Simchon, M. "Augmented Hydrostatic Extrusion of Ultra-Fine Wire," Proceedings of the 1994 NSF Design and Manufacturing Grantees Conf. published by the Society of Manufacturing Engineers, One SME Drive, P.O.Box 930 Detroit, Michigan 48121. pp 405, 406. Presented at a poster session in the January 5-7, 1994 Meeting at the Laboratory of Manufacturing and Productivity, The Material Processing Center, MIT Cambridge Massachusetts.
    186. Avitzur, B., and Simchon, M. "The Hydraw Process for Ultra-Fine Gold Bond Wire" Proceedings of the 1997 NSF Design and Manufacturing Grantees Conference. published by the Society of Manufacturing Engineers, One SME Drive, P.O.Box 930 Detroit, Michigan 48121. pp 543,544. Presented at a poster session in the January 7-10, 1997 Meeting at Seattle Washington
    187. Avitzur, B., and Zimerman, Z., "From Bull-Block to Wet-Drawing" The Wire Association International, Mordechi Award lecture, 1996.
    188. Avitzur, B., "Lubricant Evaluation Laboratory for Fine Wire Drawing" Proceedings of the Wire Association International, 1997.
    189. Avitzur, B., "Limit Analysis of Flow Through Conical Converging Dies" Proceedings of the JSTP International Seminar on Precision Forging (update '97). Osaka, Japan. March 31-April 1. pp 41-49. PDF [ 957k ]
    190. Avitzur, B., "Oscillations and Instabilities During Wet Wire Drawing " Journal of the Wire Association International, June 1998. pp. 85-89. Presented at Expo 98 in Cleveland, OH. June 1-3, 1998.
    191. Avitzur, B., Talbert, S., "Criteria for the Prevention of Filament and Wire Breaking During the Fabrication of Multifilamentary Composite Superconducting Wire" PDF [ 3012K ]

    [top]

    Books by Avitzur

    Edited Books

    Patents

     

    Home | Search | What's New | About MFI | FAQ | Prof. Avitzur | Publications | Consulting | Seminars | Tutorials | Research | Facilities | Misc | Contacting MFI | Site Map

     

    Last Modified:
    Tuesday, 04-Aug-1998 14:40:09 EDT

    Copyright 1997 Betzalel Avitzur. All rights reserved.

    Web Administrator: Web@Metalforming-Inc.COM