Chapter Thirteen ROLLING 13.1. Introduction 13.1.1. Classification 13.1.2. Strip 13.2. Strip Rolling 13.2.1. Analysis of Strip Rolling with Metal-to-Metal Contact (Boundary Lubrication) 13.2.2. Analysis of Strip Rolling with Hydrodynamic Lubrication 13.2.3. Flow and Fracture in Strip Rolling 13.2.4. Strip Rolling Mills 13.3. Profile Rolling 13.3.1. Foreword 13.3.2. Pass-Reduction Schedules 13.3.3. Three-High Mills 13.3.4. Rolling of Shapes by a Four-Roll Assembly 13.3.5. Subsequent Drawing 13.4. Other Models of Rolling 13.4.1. Foreword 13.4.2. Rolling Forming 13.4.3. Reduce Rolling 13.4.4. Cross or Wedge Rolling 13.4.5. Thread Rolling and Helical Transverse Rolling 13.4.6. Balls, Rolls, and Other Components 13.4.7. Gear Forming 13.4.8. Closing Remarks 13.5. Other Aspects of Rolling 13.6. Adiabatic Rolling References Problems
Home | Search | What's New | About MFI | FAQ | Prof. Avitzur | Publications | Consulting | Seminars | Tutorials | Research | Facilities | Misc | Contacting MFI | Site Map
Last Modified: Friday, 19-Dec-1997 21:12:14 EST Copyright 1997 Betzalel Avitzur. All rights reserved. Web Administrator: Web@Metalforming-Inc.COM